"Jmi Telescope Carrying Case For Meade Lx 8"""

    
Meade LX200 8" (both GPS and non-GPS), LX100 8", LX90, LX50 8"

The case includes four lockable latches, three steel-reinforced handles, a 3" by 26" steel hinge and die-cut foam lining with compartments for telescope, eyepieces, finder scope (must be detached and inserted into a foam compartment) and accessories. It can be carried or pulled using the attached wheels. An optional Large-Wheel Upgrade is available.

Cases are manufactured with exact-fit die-cut foam to hold the telescope as securely as possible. They can, however, be used for telescopes other than those for which they were designed. The following fork-mounted Celestron C8 / C8+ / Celestar 8 Deluxe / Powerstar 8 / Fastar 8 (both Original Version with non-tapered Celestar 8 style fork arms and Newer Version with tapered Ultima 9-1/4" style fork arms), Meade 2080 / 8" LX2 through LX10 / Ultima 8 telescopes should fit inside with a small amount of space between the fork arms and the foam. A small cut may be needed for the fork arms and/or control panel.

The optical tube of Celestron and Meade 8" German Equatorial SCT or Newtonian telescopes (26" length maximum) will fit inside the loosely with extra padding needed to take up extra space, especially at one or both ends of the optical tube.

All JMI Carrying Cases include crush-resistant die-cut foam, contoured to safely hold your telescope during transport. The larger cases are manufactured by JMI with 1/4" plastic for super strong support. Most cases include an extra handle on one end with wheels on the opposite end for easily maneuvering the case without lifting the entire weight. These attractive and efficiently designed cases are substantially smaller than the original shipping box and even smaller than most soft cases. They protect your investment while making it easier to move your scope from one location to another.

SPECIFICATIONS:

• Outside dimensions: 31-1/2" x 21-1/2" x 13-1/2"
• Empty Weight: 21.0 lbs.