The 3DR IRIS+ is your aerial passport: all you need to get started shooting photos and video from incredible new perspectives. Powered by 3DR's world famous autopilot, IRIS+ is a robot that will automatically fly itself where you tell it to go, while keeping a camera dead steady with two-axis gimbal stabilization. And it's so smart that it's simple. You can fly manually using the controller or use the advanced 3PV Follow Me mode that turns IRIS+ into your own hands-free camera crew. And our tablet-based software makes flight planning exactly this easy: If you can draw it, you can fly it. The IRIS+ power system gets you 16 minutes of flight time fully loaded, and you'll want to fill every second. IRIS+ includes the advanced Pixhawk autopilot system, a high-capacity flight battery, battery charger, ground station radio, and remote controller: everything you need to make IRIS+ your personal aerial photographer.
Ready to Fly - Inside the IRIS+ box is everything you need to fly. Simply attach the props, charge the battery, and you're ready to fly manually with the included remote controller autonomously with a Mac, PC or Android device.
Follow Me - 3DR's 3rd Person View (3PV) Follow Me technology turns your IRIS+ into your own hands-free aerial camera crew that puts you in the middle of your own adventure. IRIS+ can be easily setup to follow any GPS enabled Android device. Not only will IRIS+ follow you, but this advanced technology controls the gimbal to keep the camera centered on you, capturing sweeping cinematic video from a perspective unlike any other.
Automatic Mission Planning - Using the free DroidPlanner app, IRIS+ users can plan flights by simply drawing a flight plan on any Android tablet or phone. This allows for hands free flight control, your drone will go where you tell it to go, with virtually unlimited waypoints - even keep IRIS+ pointing to the same location via a Region of Interest (ROI) waypoint throughout the entire flight. This enables fun autonomous journeys, and automatically stabilized video capture that would be otherwise impossible.
Flight Protection - The IRIS+ can land itself automatically, or return to a home point if it travels out of range or runs out of battery.
|Payload Capacity||Up to 14.1 oz / 400 g|
|Flight Time||Typically 16 to 22 minutes (depending on payload weight and other factors)|
|Flight Control System|
|Processor||32-bit Pixhawk with Cortex M4 CPU|
|GPS||uBlox GPS with integrated magnetometer|
|Receiver||3DR Radio, 915 MHz|
|Rotors||2 x CCW: 9.5 x 4.5" / 24.1 x 11.4 cm tiger motor multi-rotor; self-tightening counterclockwise rotation
2 x CW: 9.5 x 4.5" / 24.1 x 11.4 cm tiger motor multi-rotor; self-tightening clockwise rotation
|Motors||4 x 920 KV|
|Mount||Integrated GoPro camera mount with vibration dampener|
|Flight Battery||3S 5100 mAh LiPo|
|Frequency||915 MHz (FCC complaint; Europe and other regions may require the 433 MHz version)|
|Transmit Power||Up to 100 mW at 20 dBm (adjustable)|
|Receiver Sensitivity||25 mA|
|Receive Sensitivity||-117 dBm|
|Transmission Method||2-way full-duplex communication through adaptive TDM
Frequency Hopping Spread Spectrum (FHSS)
|Parallel/Serial Translation||UART interface (3.3 VDC) / transparent serial link|
|Error Correction||Corrects up to 25% of bit errors|
|Firmware||Open-source SIK firmware|
|Software Requirements||Configurable through Mission Planner and APM Planner|
|Compatible Devices||Android tablet with OTG (on the go) support
Windows desktop computer
|Connectivity||Per Radio (Two Included):
1 x Micro-USB port
1 x 6-pin DF13 connector
1 x RP-SMA for antenna
|Power Requirements||3.7 to 6 VDC (from USB or DF13 connector)|
|Dimensions||1.1 x 2.2 x 0.5" / 26.7 x 55.5 x 13.3 mm|
|Dimensions||Height: 3.9" / 100 mm
Motor-to-Motor Dimension: 21.7" / 550 mm
|Weight||With Battery: 2.8 lb / 1.3 kg|