Nimbus WiMi5200 Wireless 3G-SDI H.264 Encoder/Decoder Set

Nimbus WiMi5200 Wireless 3G-SDI H.264 Encoder/Decoder Set

Fujifilm

$1,852.99
(No reviews yet) Write a Review
SKU:
NIMWIMI5200T/R
Adding to cart… The item has been added

The WiMi5200 Wireless 3G-SDI H.264 Encoder/Decoder Set from Nimbus is a point-to-point Wi-Fi transmission system with a 1968' range and only 30ms latency. With both units featuring built-in 5 GHz Wi-Fi, no additional network connection is required. The transmitter encodes and sends up to a 1080p60 SDI signal as an H.264 encoded signal, and the receiver decodes and outputs it as video.

The transmitter features a 3G/HD/SD-SDI input and 3G/HD/SD-SDI loop output, and the receiver has a single 3G/HD/SD-SDI output. The set includes one L-series battery plate for the transmitter and one power adapter for the receiver, although both units support continuous power via 2-pin LEMO inputs. Both units offer a 1/4"-20 mounting thread on the bottom.

Key Features

  • 1968' range over 5 GHz Wi-Fi
  • 30ms latency
  • Up to 1080p60 SDI resolution
  • H.264 (MPEG-4 Parts 10: AVC) encoding/decoding
  • Transmitter: 3G/HD/SD-SDI input and loop output
  • Receiver: 3G/HD/SD-SDI output
  • Baseline profile with level 4.2
  • DIP switch selection of Wi-Fi frequency and encoding rate
  • 1/4"-20 mounting threads
Wireless Wireless Range 1968.5' / 600 m (Line-of-Sight) # of Channels 12 (40 MHz) Latency ≤ 30 ms Wi-Fi 5 GHz Wi-Fi 4 (802.11n) Interfaces Transmitter Video Connectors 1 x BNC (3G-SDI / HD-SDI / SD-SDI) Input 1 x BNC (3G-SDI / HD-SDI / SD-SDI) Loop Output Receiver Video Connectors 1 x BNC (3G-SDI / HD-SDI / SD-SDI) Output Embedded Audio SDI Format Support Video Format SDI/BNC: 1080p at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps SDI/BNC: 1080PsF at 25, 29.97, 30 fps SDI/BNC: 1080i at 50, 59.94, 60 fps SDI/BNC: 720p at 50, 59.94, 60 fps SDI/BNC: 576i at 50 fps SDI/BNC: 480i at 59.94 fps Video Standard Compliance SMPTE 274M/296M Power Transmitter Battery Support 1 x Sony L-Series / NP-F Type Transmitter Power Connector 1 x 2-Pin LEMO Input Receiver Power Connector 1 x 2-Pin LEMO Input General Transmitter Mounting 1 x 1/4"-20 Female Receiver Mounting 1 x 1/4"-20 Female Transmitter Dimensions 4.65 x 2.68 x 0.98" / 11.8 x 6.8 x 2.5 cm Receiver Dimensions 4.65 x 2.68 x 0.98" / 11.8 x 6.8 x 2.5 cm Transmitter Weight 0.6 lb / 260 g Receiver Weight 0.6 lb / 260 g
!