Loading Please Wait...  Loading... Please wait...
  • Image 1
  • Image 2

OZEN 100CF2HD 100mm Carbon Fiber Tripod & Agile 18S Fluid Head System (S-Loc)

$5,315.99
 
SKU:
OZE-18CF2HDS
Brand:
Weight:
10.30 LBS
Quantity:


Get a tripod system that stands up to the demands of ENG and EFP production with the 100CF2HD 100mm Carbon Fiber Tripod & Agile 18S Fluid Head System with S-Loc camera interface from OZEN. Comprising a 100CF2HD 100mm two-stage, heavy-duty carbon fiber tripod and an Agile 18S fluid head, this system works with 4.4 to 48.4 lb payloads. It offers 16-step counterbalance, 7/7 + 0 pan/tilt fluid drag, and working heights ranging from 28.2 to 68.2". The 100CF2HD comes equipped with a Contender heavy-duty mid-level spreader, as well as with deep-tread rubber feet for better traction on smooth surfaces. Included with the system is a SoftCase 100HD2, which has a carry strap and an internal pouch for storing the included pan bars.

 

OZEN 100CF2HD 100mm Two-Stage, Heavy-Duty Carbon Fiber Tripod

Give your camera solid feet to stand on with the 100CF2HD 100mm Two-Stage, Heavy-Duty Carbon Fiber Tripod from OZEN. Designed for heavy-payload and high-fluid-drag applications, this two-stage tripod supports up to 99 pounds and offers working heights ranging from 20 to 60". For greater rigidity, the 22mm diameter carbon fiber tripod leg tubes are pin-secured to their anchors—no glued joints. Flip brake levers are used to lock the legs into place, making for fast deployment and stowage. Moreover, the 100CF2HD comes equipped with a Contender heavy-duty mid-level spreader, as well as with deep-tread rubber feet for better traction on smooth surfaces.

For use with separately available 100mm fluid heads
Carbon fiber leg tubes are lighter and stiffer than aluminum, resist damage from minor impacts, and have less flex when using high increments of fluid drag
Carbon fiber tubes are pinned to their joints, not glued
Flat and angled spreader positions
Payload capacity of 99 pounds
Conspicuous red flip brake levers for fast deployment and stowage
Brake adjustment mechanism

 

OZEN Agile 18S Fluid Head

Smooth your pans and tilts with the Agile 18S Fluid Head from OZEN. Designed for fast setup in ENG- and EFP-style shooting scenarios, the Agile 18S is equipped with a CNC-machined dial mechanism for crisp, repeatable counterbalance adjustment in 16 steps. The Agile 18S's versatile design enables you to quickly change camcorder configurations within a payload range of 4.4 to 48.4 pounds.

The Agile 18S is equipped with a 7/7 + 0 fluid drag mechanism and offers a tilt range of 90 to -80°. The considerable amount of fluid drag available at higher increments enables experienced operators to acquire full-zoom, pan/tilt-intensive images that are indistinguishable from those acquired in close. This fluid head uses the S-Loc camera mounting interface, which enhances the front-to-rear balance adjustment range to accommodate exceptionally front- or back-heavy camera setups.

Ergonomic pan/tilt fluid drag and counterbalance controls
Distinguishable, 90° opposed pan and tilt brakes
Replaceable pan bar rosettes for longer fluid head usability
Illuminated bubble level
Constructed of CNC-machined and anodized aluminum with stainless steel fasteners
Two telescopic pan bars included

 

OZEN Soft Case for Two-Stage Heavy-Duty 100mm Systems for 100HD2 Tripod

The OZEN Soft Case for Two-Stage Heavy-Duty 100mm Systems for 100HD2 Tripod is a spare/replacement part. Users will appreciate the internal pouch for storing a pan bar and carry strap.

Replacement Soft Case 100HD2 included w/systems configured with 100AL2HD or 100CF2HD tripod

General
Head Mount Type 100 mm Bowl
Load Capacity 99 lb / 44.91 kg
Maximum Working Height 60" / 152.40 cm (with Spreader)
Minimum Working Height 20" / 50.80 cm (with Spreader)
Folded Length 28" / 71.12 cm
Materials Carbon Fiber
Weight 10.9 lb / 4.94 kg

Legs
Leg Lock Type Flip Lock
Leg Sections 3
Feet Features Rubber
Spreader Mid-Level
Center Column
OZEN Agile 18S Fluid Head
Tripod Platform
Base Mount 100 mm Half Ball

Pan & Tilt
Drag Control Pan: Variable 7-Step Plus 0
Tilt: Variable 7-Step Plus 0
Drag Type Fluid
Vertical Tilt +90° to -80°
Independent Pan Lock Yes
Independent Tilt Lock Yes

Physical
Material Aluminum, Stainless Steel
Load Capacity 4.4 to 48.4 lb / 2 to 21.95 kg
Counter Balance Incremental 16-Step
Pan Handle Fittings 2 x Rosette
Bubble Level 1 x Illuminated
Operating Temperature -40 to 140°F / -40 to 60°C
Dimensions 8.19 x 7.48" / 208 x 190 mm
Weight 10.3 lb / 4.7 kg

Product Reviews

Vendors Other Products

Free Shipping Rules

Categories

Recent Updates

Sign up to our newsletter